For more information on how to setup your DVR please click here. When complete the DVR will be reset to its factory default settings and you will be able to setup your DVR. Continue holding the reset switch and allow the device to initialize for 20 - 30 seconds and then release the switch. Once power is removed from the unit, press and hold the factory reset switch for 4 - 5 seconds, continue holding the reset switch and plug the DVR's power supply back into the unit, you will hear a beep. To factory reset the device, unplug the DVR from power. A factory reset can be done simply by pushing a paperclip into the pinhole reset button located at the back.
This is the factory reset switch for your device: This can be a drastic thing to do as you can lose all of your history but this process will help to troubleshoot any issues. On the motherboard you will notice a small black button. Once the screws have been removed, lift the lid to expose the DVR's motherboard. Use a Phillips head screwdriver to remove the four screws on the back and sides of the device. To begin the process you will need to remove the DVR cover. Using a plastic tool, eraser on the top of a pencil, or your finger, press the reset button down gently for 15 seconds. To verify if your DVR has this specific end notation, inspect the serial number tag on the bottom of the device before proceeding with this factory reset procedure. Most newer Amcrest model DVRs with end notations "S5" or "H5" will have a different factory reset process than its previous counterparts. How To Perform a Factory Reset on S5/H5 Model DVRs Go to your NVR or DVR physically by being in front of it, and using the USB mouse attached to it log into the recorder using the admin account.
0 kommentar(er)
